| Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
|---|---|---|---|---|---|
| ACL.01 | Laboratory test: Measurement of airborne sound reduction index for Rw. Range: Rw ≤ 72 dB | ISO 10140-1:2021 (except annexes J and K); ISO 10140-2: 2021; ISO 10140-4:2021; ISO 717-1:2020 | Building elements | EN 1793-2:2018, EN 1793-3:1997 (only applicable to noise barriers intended for road traffic); EN 16272-2:2012, EN 16272-3-1:2012 (only applicable to noise barriers intended for railway) | |
| ACL.03 | Laboratory test: Determination of impact sound insulation index, Ln,w. Range Ln,w ≥ 25 dB | ISO 10140-3:2021; ISO 10140-4:2021; ISO 717-2:2020 | Building acoustics | Range: Ln,w ≥ 25 dB | |
| ARG.00 | Mortar characterization - Other tests (standards EN, ASTM, LNEC…) | Diverse | Mortar | ||
| ARG.01 | Determination of particle size distribution of mortars by sieve analysis | EN 1015-1:1998, EN 1015-1:1998/A1:2006 | Mortar | ||
| ARG.02 | Determination of density (vibration method, filling method and shock method) | EN 1015-6:1998, EN 1015-6:1998/A1:2006 | Mortars | ||
| ARG.03.01 | Determination of workable life and correction time of fresh mortar - Method A | EN 1015-9:1999, EN 1015-9:1999/A1:2006 (Method A) | Mortar | ||
| ARG.03.02 | Determination of workable life and correction time of fresh mortar - Method B | EN 1015-9:1999, EN 1015-9:1999/A1:2006 (Method B) | Mortar | ||
| ARG.03.03 | Determination of workable life and correction time of fresh mortar - Method C | EN 1015-9:1999, EN 1015-9:1999/A1:2006 (Method C) | Mortar | ||
| ARG.04 | Determination of flexural and compressive strength | EN 1015-11:2019 | Mortars | ||
| ARG.05 | Determination of water vapour permeability | EN 1015-19:1998, EN 1015-19:1998/A1:2004 | Hardened plastering mortars | ||
| ARG.06 | Determination of shrinkage | EN 13888-2:2022 (section 9.3) | Grouts for tiles | ||
| ARG.07 | Determination of consistence of fresh mortar (by flow table) | EN 1015-3:1999, EN 1015-3:1999/A1:2004, EN 1015-3:1999/A2:2006 | Mortars | ||
| ARG.08 | Determination of dry bulk density in hardened conditions | EN 1015-10:1999, EN 1015-10:1999/A1:2006 | Mortars | ||
| ARG.09 | Determination of adhesive strength of hardened rendering and plastering mortars on substrates (laboratory conditions) | EN 1015-12:2016 | Mortar | ||
| ARG.10 | Determination of adhesive strength by the pull-off in situ method | Internal Procedure ARG.10.IE.01 (version no. 5 of May 2020) equivalent to EN 1015-12:2016 | Coatings |