|
Prata, J.; Simões, N.; Tadeu, A. 2018 "Heat transfer measurements of a linear thermal bridge in a wooden building corner". Energy and Buildings, 158, pp. 194-208.
VER MAIS
|
|
Romero, A.; Cruz-Muñoz, F.J.; Tadeu, A.; Galvín, P. 2018 "A novel 2.5D spectral approach for studying thin-walled waveguides with fluid-acoustic interaction". Computers & Structures, 204, pp. 1-19.
VER MAIS
|
|
Škerget, L.; Tadeu, A.; Brebbia, C.A. 2018 "Transient numerical simulation of coupled heat and moisture flow through a green roof". Engineering Analysis with Boundary Elements, 95, pp. 53–68.
VER MAIS
|
|
Škerget, L.; Tadeu, A.; Brebbia, C.A. 2018 "Transient simulation of coupled heat and moisture flow through a multi-layer porous solid exposed to solar heat flux". International Journal of Heat and Mass Transfer, 117, pp. 273-279.
VER MAIS
|
|
Tadeu, A.; Škerget, L.; Simões, N.; Fino, R. 2018 "Simulation of heat and moisture flow through walls covered with uncoated medium density expanded cork". Building and Environment, 142, pp. 195–210.
VER MAIS
|
|
Tadeu, S.; Tadeu, A.; Simões, N.; Gonçalves, M.; Prado, R. 2018 "A sensitivity analysis of a cost optimality study on the energy retrofit of a single-family reference building in Portugal". Energy Efficiency, 11 (6), pp. 1411–1432.
VER MAIS
|
|
Torres, I. 2018 "New technique for treating rising damp in historical buildings: wall base ventilation". Journal of Cultural Heritage, 31 (Supplement), pp. S60-S70.
VER MAIS
|
|
Torres, I.; Veiga, R.; Freitas, V.P. 2018 "Influence of Substrate Characteristics on Behavior of Applied Mortar". Journal of Materials in Civil Engineering, 30 (10), pp. .
VER MAIS
|
|
António, J.; Tadeu, A. 2017 "Modelling 3D thin sound-absorbing barriers using a dual formulation based on the boundary element method". Noise Control Engineering Journal, 65 (3), pp. 212-223.
VER MAIS
|
|
Cruz-Muñoz, F.J.; Romero, A.; Tadeu, A.; Galvín, P. 2017 "A 2.5D spectral approach to represent acoustic and elastic waveguides interaction on thin slab structures". Procedia Engineering, 199, pp. 1374-1379.
VER MAIS
|
|
Fino, R.; Simões,N.; Tadeu, A. 2017 "Numerical and experimental evaluation of the drying behaviour of medium density expanded cork boards used as an external coating". International Journal of Sustainable Development and Planning, 12 (2), pp. 315–325.
VER MAIS
|
|
Marques, B.; Tadeu, A.; de Brito, J.; Almeida, J. 2017 "A perspective on the development of sustainable construction products: An Eco-design approach". International Journal of Sustainable Development and Planning, 12 (2), pp. 304-314.
VER MAIS
|
|
Romero, A.; Galvín, P.; António, J.; Domínguez, J.; Tadeu, A. 2017 "Modelling of acoustic and elastic wave propagation from underground structures using a 2.5D BEM-FEM approach". Engineering Analysis with Boundary Elements, 76, pp. 26-39.
VER MAIS
|
|
Serra, C.; Tadeu A.; Simões, N. 2017 "Boundary element method simulation of 3D heat diffusion in defective layered media for IRT building applications". Engineering Analysis with Boundary Elements, 81, pp. 44-52.
VER MAIS
|
|
Serra, C.; Tadeu, A.; Simões, N. 2017 "Heat transfer modelling using analytical solutions for infrared thermography applications in multilayered buildings systems.". International Journal of Heat and Mass Transfer, 115 (Part B), pp. 471-478.
VER MAIS
|
|
Škerget, L.; Tadeu, A.; Ravnik J. 2017 "BEM numerical simulation of coupled heat, air and moisture flow through a multilayered porous solid". Engineering Analysis with Boundary Elements, 74, pp. 24-33.
VER MAIS
|
|
Tadeu, A.; Romero, A.; Stanak, P.; Sladek, J.; Sladek, V.; Galvin, P.; Antonio, J. 2017 "Modeling elastic wave propagation in fluid-filled boreholes drilled in nonhomogeneous media: BEM – MLPG versus BEM-FEM coupling". Enginering Analysis with Boundary Elements, 81, pp. 1-11.
VER MAIS
|
|
Wang, F.; Chen, W.; Tadeu, A.; Correia, C.G. 2017 "Singular boundary method for transient convection–diffusion problems with time-dependent fundamental solution". International Journal of Heat and Mass Transfer, 114, pp. 1126–1134.
VER MAIS
|
|
Cunha, S.; Aguiar, J.B.; Tadeu, A. 2016 "Thermal performance and cost analysis of mortars made with PCM and different binders". Construction and Building Materials, 122, pp. 637-648.
VER MAIS
|
|
López, O.L.; Torres, I. 2016 "Ventilation system for drying out buildings after a flood: influence of the air change rate on the drying process". Drying Technology, 34 (11), pp. 1343-1353.
VER MAIS
|